71,46 € inkl. 19% MwSt.

The aluAgent Standard Set contains everything you need to start soldering immediately

• 1x propane/butane cartridge (35%/65%) 600ml
• 1x burner
• 1 CC4000 heat insulation paste (200 ml)
• 5 x 1 meter of aluAgent High-Stability 150 solder wire (2.0 mm)
• 1 instruction sheet (English)

aluAgent HighStability is the most popular aluminium solder wire of our home users due to its flexibility.

It can be dosed even better when applied because of its thickness of 2.0 mm – and thus its use is more economical despite its maximum stability.

Join all aluminium and cast aluminium alloys in a simple way and without fluxing agents – using a soft soldering process with a working temperature of only 380 °C – 420 °C (depending on the alloy). Also connections of all types of AL-alloys with galvanized sheet iron is conditionally possible (depending on the kind of galvanization).

• Very slight or no deformation of the workpiece
• aluAgent can also be used in closed rooms without  hesitation! (Free of lead and cadmium)
• No special training or special devices required
• Separation by heating (380 °C) without difficulties
• A variety of heat sources can be used, e.g. laser, hot air, butane, propane, induction heating
• Connections of cast aluminium possible, with the help of a second heat source (for example an electric plate)
• Suitable for further processing – it can be for example drilled, cut, turned or tapped

• Tensile strength: up to 2.3 of aluminium
• Hardness (Brinell HBW 2.5/62.5): average 95 – 105 according to DIN EN ISO 6506-1
• Thermal expansion: up to 3 – 6% (depending on the cooling process)
• Working temp./melting point: 380 °C – 420 °C
• Heat resistance: until 260 °C
• TÜV-Germany: test-report B10-01760-A
• Toxics: None – free of lead and cadmium
• Made in Germany